Air Source Heat Pump Installation in Wirral

Air source heat pumps for Wirral family homes — low-carbon heating for the borough's many semi-detached and detached houses, with proper heat-loss surveys and careful siting from Bebington to Heswall.

Local, trusted installers
No obligation quote
Fixed, transparent prices

Check my home

Speak to our team0151 665 0995

It's free
Takes 60 seconds
No pressure
Fixed prices

Get your free Wirral home assessment

Quick answer

An air source heat pump replaces a gas or oil boiler with electric, low-carbon heating. Wirral’s housing suits a considered switch: 57.7% of dwellings are semi-detached or detached and 65.7% are owner occupied (Census 2021), so many homes have garden or external space for an outdoor unit and owners who can decide. With 84.3% of homes on mains gas only, a heat pump is a deliberate change that depends on a proper heat-loss survey, radiator sizing and where the unit can be sited — not a like-for-like swap. An MCS-registered installer is the right starting point.

Last updated: July 2026
Reading time: 6 minutes
Reviewed by: Warmr Energy Team

Local knowledge. Lower-carbon heating.

A heat pump is not simply a boiler in a box outside — it heats water to a lower temperature, so it works best in a home surveyed for heat loss with radiators sized to suit. Wirral's larger, often owner-occupied family homes frequently have the external space and the scope for that kind of proper design.

Local installers you can trust
Quality equipment & warranties
Aftercare & support

Homes in Wirral at a glance

329,896Population+3.1% since 2011
44 yrsMedian age
150,920Dwellings
23.6%Terraced homes
18.7%Flats & maisonettes
40.6%Semi-detached homes
17.1%Detached homes
65.7%Owner-occupied
15.4%Social rented
18.9%Private rented
84.3%Mains-gas heating
11,104 kWhMedian gas use
3,001 kWhMedian electricity use
4,841Solar installations (2024)up from 1,778 in 2014
33.8Solar densityinstalls per 1,000 homes
26Conservation areas

Population: ONS mid-2025 estimate (+3.1% since mid-2011). Housing mix, tenure and central-heating profile: Census 2021 (84.3% mains-gas-only, 4.8% electric-only). Domestic gas and electricity use: DESNZ 2024 local-authority consumption (per meter). Solar sites: DESNZ 2014 & 2024; 2024 density 33.8 per 1,000 estimated households. Council-listed conservation areas: 26 — check the property address and the latest Wirral Council map before any address-specific claim.

Air source heat pump installation across Wirral

An air source heat pump takes warmth from the outside air and uses it to heat your home and hot water, running on electricity instead of gas or oil. Wirral is well suited to considering one: with semi-detached and detached homes making up 57.7% of dwellings and 65.7% owner occupation (Census 2021), many properties have the external space for an outdoor unit and homeowners in a position to plan the change.

Because 84.3% of Wirral homes are heated by mains gas only (Census 2021), moving to a heat pump is a deliberate upgrade rather than a straight swap — it depends on a heat-loss survey, suitable radiators or underfloor heating, and hot-water cylinder space. An MCS-registered installer designs the system around your home so it runs efficiently.

Check my home

Why Wirral homes differ

A heat pump is a design-led upgrade, and Wirral’s housing shapes what that involves. These factors, all drawn from the borough’s verified profile, come up most:

Space for the outdoor unit. With 57.7% of homes semi-detached or detached, many Wirral properties have a garden, side return or external wall where an outdoor unit can be sited with sensible clearances.
Owner-occupied decision-making. At 65.7% owner occupation, a large share of households can plan and commit to a heating change themselves rather than needing a landlord.
Coming off mains gas. With 84.3% on mains gas only, a heat pump is a considered switch from gas — the survey checks whether your home is ready and what improvements help it run efficiently.
Heat loss and radiators. Heat pumps run at lower flow temperatures, so a heat-loss survey and correctly sized radiators or underfloor heating matter more than the headline unit size.
Coastal and conservation siting. In exposed coastal areas and Wirral’s 26 conservation areas (including parts of Oxton and Port Sunlight), the outdoor unit’s position, visibility and any planning conditions must be checked at the address.

Every point above is a reason a proper survey — not a phone quote — is the right first step.

How it works

What to expect from a good heat pump installer in Wirral

A heat pump only performs when it is designed for the home — here is what a reputable installer does.

1
A proper heat-loss survey
A reputable installer carries out a room-by-room heat-loss survey of your home before recommending anything — assessing insulation, radiators, hot-water needs and where the outdoor unit can go. Be wary of a heat pump sized from a phone call or a boiler swap-style quote.
- Heat-loss survey
- Not a phone quote
2
MCS-registered installation
For heat pumps, look for an MCS-registered installer — it underpins a properly designed system and access to relevant grant schemes where eligible. A good company explains flow temperatures, radiator changes and realistic running expectations.
- MCS registered
- Honest design
3
A clear, written quote
Expect a transparent, itemised quote covering the heat pump, any radiator or cylinder changes, the outdoor-unit position and the work — with efficiency explained realistically for your home, never a guaranteed saving.
- Fixed & transparent
- Realistic expectations
4
Tidy install & proper handover
A professional installation is carried out with minimal disruption, then commissioned and handed over — with the controls explained, the system balanced, and guidance on running it efficiently and servicing.
- Minimal disruption
- Commissioned properly

Wirral heat pump questions, answered

Is my Wirral home suitable for an air source heat pump?

Many are worth assessing. With 57.7% of Wirral dwellings semi-detached or detached (Census 2021), a lot of homes have space for an outdoor unit and scope for the radiator or underfloor design a heat pump needs. Suitability is decided by a heat-loss survey at your address, which checks insulation, radiators and hot-water needs — not by the postcode.

Do I need to change my radiators?

Sometimes. Heat pumps run at lower flow temperatures than a gas boiler, so some radiators may need upsizing, or underfloor heating may suit part of the home. The heat-loss survey identifies exactly what your home needs so the system runs efficiently — this is a normal part of designing a heat pump.

Where does the outdoor unit go, and will it be a problem in a conservation area?

The outdoor unit needs an external position with airflow and clearance — often a side or rear wall or garden space, which many Wirral homes have. In the borough’s 26 conservation areas (including parts of Oxton and Port Sunlight) and on prominent frontages, its position and visibility must be checked against planning conditions at your specific address before installation.

I am currently on mains gas — is a heat pump still worth considering?

It can be. Around 84.3% of Wirral homes are on mains gas only (Census 2021), so moving to a heat pump is a deliberate switch to lower-carbon heating rather than a like-for-like swap. Whether it suits you depends on your home’s heat loss, radiators and how you heat it — which is what the survey establishes. We do not quote guaranteed savings.

Does living near the coast affect a heat pump?

Coastal exposure around Wallasey, Hoylake and West Kirby is a sensible specification and siting consideration for the outdoor unit, as with any external equipment. It is a design point rather than a barrier, and a good installer positions and specifies the unit with local conditions in mind.

Areas we cover across Wirral

Across Wirral’s family homes and coastal towns — check whether a heat pump suits your property with a free assessment.

Wirral neighbourhoods

Nearby areas we also cover

We help homeowners well beyond Wirral — explore the other towns and areas we serve close by:

Ready to upgrade your Wirral home?

Enter your postcode to check what your home qualifies for — free and with no obligation.

Local, trusted installers
No obligation quote
Fixed, transparent prices